Fluke 190-202 ScopeMeter® Test Tool

2.5 GS/s sampling rate, 200MHz bandwidth with 2 input channels and DMM for industrial process control, automation or electronic applications







Fluke 190-202 – 20 years of ScopeMeter® Test Tool Innovation

As the first two-channel portable scope safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter® 190-202 combines an unprecedented level of performance, ruggedness, and portability with 200 MHz bandwidth and real-time sampling rates up to 2.5GS/s and 200 ps resolution to capture noise and other disturbances. This model feature deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter® test tools are hand-held battery operated, designed to meet the demands of field service professionals.


See More, Fix More with the Two-Channel CAT IV Rated Fluke ScopeMeter

The Fluke ScopeMeter® 190-202 combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.

The 190-202 ScopeMeter® is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

  • Two electrically isolated inputs
  • CAT III 1000V / CAT IV 600V safety rated
  • 200 MHz bandwidth model
  • 2.5 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • Up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock


Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The Fluke ScopeMeter 190-202 portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.

oscilloscopeThree-dimensional testing for industrial systems »

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift



Three-phase testing for diagnosing VSD, power inverters, and converters »

  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the Harshest Conditions with the only IP-51-rated Scope on the Market Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants, ensuring reliable accurate performance every time you need them.


Meter mode

Built in multimeter to quickly and conveniently perform precise measurements

Built-in digital multimeter with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc, Vac, Vac+dc, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.



Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.



scopemeter usbCapture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.



See a Stable Display Instantly with Connect-and-View&trade Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.



Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™oscilloscope

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

  • Stores events like motion profiles, UPS, power supply, and motor start-ups
  • With the Stop-on-Trigger mode, the ScopeMeter 190-202 automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles


Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faultsoscilloscope

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults


Bandwidth200 MHz
Number of channels200 MHz: 2 channels
Real-time sample rate2.5 GS/s
Inputs2 scope plus DMM input
Independently floating isolated inputsUp to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range2 ns – 2 min/div
Input sensitivity2 mV-100 V/div
Trigger typesConnect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger sourceAny scope input channel, or external via DMM input
Glitch capture8 ns
Scope measurementsCursor: 7
Automatic: 30
Maximum record lengthScopeRecord mode: 30,000 pts
Scope mode: 10,000 pts per input
PersistenceDigital persistence giving analog oscilloscope-like waveform decay
Waveform compareWaveform reference with automatic Pass/Fail testing
DMM Specification
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum resolution5000 counts
MeasurementsVDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory2 Channel
Screen + Setup: 30
Recording: 10
Display153 mm full color LCD with fast update rate
Environmental Specifications
Operating temperature0°C to 40°C Including Batteries
0°C to 50°C Excluding Batteries
Storage Temperature-20°C to +60°C
Operating altitudeUp to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Safety Specifications
Electrical safety1,000 V CAT III/600V CAT IV (EN61010-1)
Mechanical and General Specifications
Size270 x 190 x 70 mm
Weight2.2 kg
Warranty3-years on main instrument, 1-year on accessories
Li-Ion batteryBP290 2400 mAh battery up to 4 Hours included standard
Included Accessories
VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter® demo package (restricted functionality)
USB Interface Cable
WarrantyThree years on main instrument, one year on accessories


Models (1)
Model NameDescription
Fluke 190-202Fluke 190-202 ScopeMeter® Test Tool

  • Color Fluke 190-202 ScopeMeter® 200 MHz
  • 2 channels
  • DMM/Ext.input


Accessory Kits (1)
Model NameDescription
Fluke MA190Fluke MA190 Accessory Kit for Medical and Video Applications
Batteries, Chargers & Adapters (4)
Model NameDescription
Fluke BC190Fluke BC190 Line Voltage Adapter / Battery Charger
Fluke BP290Fluke BP290 2400 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
Fluke BP291Fluke BP291 4800 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
Fluke EBC290Fluke EBC290 External Battery Charger for BP290 and BP291
Cases & Holsters (2)
Model NameDescription
Fluke C195Fluke C195 Case
Fluke C290Fluke C290 Hard Shell Protective Carrying Case for Fluke 190-series II
Clips (1)
Model NameDescription
Fluke HC200Fluke HC200 Hook Clip set 2 red, 2 gray
Compatible Products (1)
Model NameDescription
Fluke 190-062Fluke 190-062 ScopeMeter® Test Tool
Current Clamps (1)
Model NameDescription
Fluke i200sFluke i200s AC Current Clamp
Options (2)
Model NameDescription
Fluke SCC290Fluke FlukeView Software for ScopeMeter (SW90W) and Carrying Case (C290) Kit
Fluke HH290Fluke HH290 Hanging Hook for ScopeMeter 190-Series II
Software (1)
Model NameDescription
Fluke SW90WFluke SW90W FlukeView ScopeMeter Software
Test Leads, Probes & Clips (23)
Model NameDescription
Fluke AS400Fluke AS400 Probe Accessory Extension Set 1
Fluke RS400Fluke RS400 Probe Accessory Replacement Set
Fluke RS500Fluke RS500 Probe Set
Fluke TL175Fluke TL175 TwistGuardTM Test Leads
Fluke VPS101Fluke VPS101 – Voltage Probe Set, 1:1, one black
Fluke VPS410Fluke VPS410 Probe-sets, 10:1 (1 red, 1 blue, 1 grey, 1 green)
Fluke VPS410-BFluke VPS410-B ScopeMeter Voltage Probe-set, blue, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-GFluke VPS410-G ScopeMeter Voltage Probe-set, grey, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-II-BFluke VPS410-II-B ScopeMeter® Voltage Probe Set
Fluke VPS410-II-GFluke VPS410-II-G ScopeMeter® Voltage Probe Set
Fluke VPS410-II-RFluke VPS410-II-R ScopeMeter® Voltage Probe Set
Fluke VPS410-II-VFluke VPS410-II-V ScopeMeter® Voltage Probe Set
Fluke VPS410-RFluke VPS410-R ScopeMeter Voltage Probe-set, red, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-VFluke VPS410-V ScopeMeter® Voltage Probe Set
Fluke VPS410-XFluke VPS410-X Voltage Probes
Fluke VPS420-BFluke VPS420-B ScopeMeter® Voltage Probe Set
Fluke VPS420-GFluke VPS420-G ScopeMeter® Voltage Probe Set
Fluke VPS420-RFluke VPS420-R ScopeMeter® Voltage Probe Set
Fluke VPS420-VFluke VPS420-V ScopeMeter® Voltage Probe Set
Fluke VPS510-BFluke VPS510-B ScopeMeter® Compact Probe
Fluke VPS510-GFluke VPS510-G ScopeMeter® Compact Probe
Fluke VPS510-RFluke VPS510-R ScopeMeter® Compact Probe
Fluke VPS510-VFluke VPS510-V ScopeMeter® Compact Probe
Test Probes (3)
Model NameDescription
Fluke TRM50Fluke TRM50 Coaxial Feed-through BNC Male to BNC Female Cable Terminator
Fluke VPS220-GFluke VPS220-G Voltage Probe Set, 100:1, One Grey
Fluke VPS220-RFluke VPS220-R Voltage Probe Set, 100:1, One Red



190 Series II Users ManualDownload
190 Series II Users Manual SupplementDownload
190 Programmers GuideDownload
190 Series II Service ManualDownload
190 Series II Service Manual SupplementDownload
190 Series II Statement of Memory VolatilityDownload
EBC290 Instruction SheetDownload
HH290 Instruction SheetDownload
Application Notes (14)
A first look at digital storage oscilloscopesDownload
Capturing elusive waveform anomalies with pass/failDownload
Checking voltage-frequency ratio on variable-speed drives with a Fluke ScopeMeter 190 Series test toolsDownload
Easy capture of in-rush currents with a Fluke ScopeMeter 190 Series test toolsDownload
Fluke ScopeMeter 125 test tools helps solve a Modbus RS-485 timing problemDownload
Injection molding machine measurements with a Fluke ScopeMeter 190 Series test toolsDownload
Measuring motor shaft voltage and bearing currents with the Fluke 190 Series II ScopeMeter test toolsDownload
Measuring short interrupts on the mains with a Fluke ScopeMeter 190 Series Test ToolsDownload
On the rivers of SurinameDownload
Optimum oscilloscope bandwidth and sample rateDownload
Troubleshooting made simple with Fluke 190C Series ScopeMeter test toolsDownload
Using a Fluke ScopeMeter 125 to troubleshoot FOUNDATION fieldbus installationsDownload
Verifying hydraulic control system operationDownload
Who sets the rules for electrical testing and safety?Download
Brochures (3)
Fluke 190 and 120 Series ScopeMeter Test Tools Family BrochureDownload
Fluke ScopeMeter Test Tools Family BrochureDownload
Introducing the complete 190 Series II ScopeMeter® Test ToolDownload
Data Sheets (2)
Fluke ScopeMeter 190 Series Test Tools Data SheetDownload
Fluke ScopeMeter Test Tools VSD FailureDownload
Demos (1)
Webinar Part B: Capturing and Analyzing Unknown WaveformsDownload