The 753 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis.
Covers virtually any pressure application including gauge, differential, dual (compound), absolute, and vacuum.
A family of 29 optional pressure modules provides pressure calibration and measurement capabilities. Twenty-eight modules are available, with basic accuracy specs to 0.05%. Ranges start at 0 — 1 in H20 (0 — .25kPa) and go to 0 — 10,000 psi (0 — 70,000 kPa). Additional information about pressure modules is available on the Pressure Modules Home Page.
Allow you to quickly set up powerful, automated calibration procedures for linear transmitters, DP flow transmitters, and one- and two-point limit switches. Simply select the appropriate measure and/or source functions and fill out the procedure template. The 750 Series does the rest. It quickly performs the test, calculates the errors, and displays the final results, highlighting out of tolerance points.
Enable you to map one unit to another, such as mV to ºC or ºF. Allows you to use the Fluke 750 Series with millivolt output accessories such as the Fluke 80T-IR Temperature Probe, and to document tests using non-supported units such as parts per million or revolutions per minute.
Enables technicians to record calibration results that were sourced and/or measured by other devices such as panel meters or readout-only devices.
Limit Switch Calibration
Procedures perform fast, automated calibration of one and two-point limit switches for voltage, current, temperature, and pressure.
Differential Pressure Flow Instrument Calibration
Routines use a square root function to directly calibrate DP flow instruments.
Calibrate temperature, pressure, voltage, current, resistance, and frequency. Since it both measures and sources, you can troubleshoot and calibrate all with one rugged tool.
Powerful, yet easy to use
The easy-to-follow menu-driven display guides you through any task. Get up to speed in minutes, not days. Programmable calibration routines enable you to create and run automated as-found/as-left procedures to ensure fast, consistent, calibrations.
Records and documents results
To support your ISO-9000 or regulatory standards the Fluke 753 captures your calibration results, eliminating the need to juggle a pen and pad in the field. The USB interface lets you transfer the results to a PC, thus saving the time of having to manually transcribe them when you return to the shop.
Small enough to fit easily into a tool bag and to use in tight spaces. Runs an entire shift on a rechargeable Li-ion battery pack.
Rugged and reliable
Count on Fluke’s rugged design to deliver top accuracy and reliability in harsh environments. Overmolded urethane case stands up to rough handling in industrial environments.
Bright white display
Lets you read your results in any kind of light. Backlight has three (3) settings.
Provide one-touch access to enhanced functions such as task lists, automated procedures, scaling, min/max, stepping and ramping, and review memory.
Three operating modes
Measure, Source, or simultaneous Measure/Source, – enable technicians to troubleshoot, calibrate, or maintain instrumentation with just one tool.
Displays instructions in English, French, German, Spanish, and Italian.
Built-in algebraic calculator
With four functions-plus square root-stores, recalls, and performs calculations required for setting up instruments or evaluating data in the field. Use it to set the source function to a calculated value. There’s no need to carry a pencil and paper or a separate calculator.
Programmable measurement delay
Inside automated procedures permits calibrating instruments that respond slowly.
You’re going to love what we’ve done with your calibrator.
The new 753 is everything you needed and wished for in the 743B and more!
The 753 does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You’ll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.
For documentation, the 753 automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
The Fluke 753 Documenting Process Calibrator : Work smarter. Work faster.
|C700||Hard Carrying Case|
|C799||Soft Field Case|
|750Pxx||Pressure Module Series|
|FLUKE-700PCK||Pressure Module Calibration Kit|
|700PMP||Pressure Pump 150 psi (10 bar)|
|700HTH-1||Fluke 700HTH-1 Hydraulic Test Hose|
|700PRV-1||Fluke 700PRV-1 Pressure Relief Valve Kit|
|700PTP-1||Fluke 700PTP-1 Pneumatic Test Pump|
|700HTP-2||Hydraulic Test Pump|
|AC220||SureGrip™ Alligator Clips|
|AC280||SureGrip™ Hook Clips|
|AC285||SureGrip™ Alligator Clips|
|700TLK||Fluke 700TLK Process Test lead kit|
|TL940||Mini-Hook Test Leads|
|TL950||Mini-Pincer Test Leads|
|TP74||Lantern Tip Test Probes|
|TP920||Test Probe Adapter Set|
|700TC1||Thermocouple Plug Kit 700C1|
|80CJ-M||Type J Male Mini-Connectors|
|80CK-M||Type K Male Mini-Connectors|
|80PJ-EXT||Extension Wire Kit|
|80PK-1||Bead Probe (Type K)|
|80PK-22||SureGrip™ Immersion Temperature Probe|
|80PK-24||SureGrip™ Air Temperature Probe|
|80PK-25||SureGrip™ Piercing Temperature Probe|
|80PK-26||SureGrip™ Tapered Temperature Probe|
|80PK-27||SureGrip™ Industrial Surface Temperature Probe|
|80PK-8||Pipe Clamp Temperature Probe|
|80PK-9||General Purpose Probe|
|80PK-EXT||Extension Wire Kit|
|700PD2||Dual Pressure Module ±1 psi (±6900 Pa)|
|700PD3||Dual Pressure Module ±5 psi (±34 kPa)|
|700PD4||Dual Pressure Module ±15 psi (±103 kPa)|
|700PD5||Dual Pressure Module –15 to 30 psi (–100 to 207 kPa)|
|700PD6||Dual Pressure Module –15 to 100 psi (–100 to 690 kPa)|
|700PD7||Dual Pressure Module –15 to 200 psi (–100 to 1380 kPa)|
|700PV3||Vacuum Pressure Module –5 psi (–34 kPa)|
|700PV4||Vacuum Pressure Module –15 psi (–103 kPa)|
|BC7240||Battery charger/Eliminator for 75x|
|BP7240||Li-Ion Battery Pack for 75x|
|700SW||Fluke 700 SW DPC/TRACK Software|
|750SW||Fluke 750 SW DPC/TRACK2 Software|