Fluke 190-202/S ScopeMeter® Test Tool

2.5 GS/s sampling rate, 200 MHz bandwidth with 2 input channels and DMM for industrial process control, automation or electronic applications







Fluke 190-202/S – 20 years of ScopeMeter® Test Tool Innovation

As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter 190-202/S combines an unprecedented level of performance, ruggedness, and portability with 200 MHz bandwidth and real-time sampling rates up to 2.5 GS/s and 200 ps resolution to capture noise and other disturbances. This model features deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.


See More, Fix More with the Two-Channel CAT IV Rated Fluke ScopeMeter

The Fluke ScopeMeter 190-202/S combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications.

The ScopeMeter 190-202/S is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter, TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering, and much more:

  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 200 MHz bandwidth model
  • 2.5 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The Fluke ScopeMeter 190-202/S portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000 V/CAT IV 600 V environments.

Three-dimensional testing for industrial systems »Oscilloscope

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift

Three-phase testing for diagnosing VSD, power inverters, and converters »Oscilloscope

  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the harshest conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants ensuring reliable accurate performance every time you need them.

Built in multimeter to quickly and conveniently perform precise measurementsMeter mode

Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include V DC, V AC, V AC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

Work a Full Shift on a Single ChargeOscilloscope

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.

Capture and Share Waveforms Easily with New USB connectivityScopeMeter USB

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

See a Stable Display Instantly with Connect-and-View&trade Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™oscilloscope

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

  • Stores events like motion profiles, UPS, power supply, and motor start-ups
  • With the Stop-on-Trigger mode, the ScopeMeter 190-202/S automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faultsoscilloscope

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults


Bandwidth 200 MHz
Number of channels 200 MHz: 2 channels
Real-time sample rate 2.5 GS/s
Inputs 2 scope plus DMM input
Independently floating isolated inputs Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range 2 ns – 2 min/div
Input sensitivity 2 mV-100 V/div
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger source Any scope input channel, or external via DMM input
Glitch capture 8 ns
Scope measurements Cursor: 7
Automatic: 30
Maximum record length ScopeRecord mode: 30,000 pts
Scope mode: 10,000 pts per input
Persistence Digital persistence giving analog oscilloscope-like waveform decay
Waveform compare Waveform reference with automatic Pass/Fail testing
DMM Specification
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode) 4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum resolution: 5000 counts
Measurements: VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory Screen + Setup: 30
Recording: 10
Display 153 mm full color LCD with fast update rate
Environmental Specifications
Operating temperature 0°C to 40°C Including Batteries
0°C to 50°C Excluding Batteries
Storageemperature -20°C to +60°C
Operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Safety Specifications
Electrical safety 1,000V CAT III/600V CAT IV (EN61010-1)
Mechanical and General Specifications
Size 270 x 190 x 70 mm
Weight 2.2 kg
Warranty 3-years on main instrument, 1-year on accessories
Li-Ion battery BP290 2400 mAh battery up to 4 Hours included standard
Included Accessories
Two channel models VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter® demo package (restricted functionality)
USB Interface Cable
Warranty Three years on main instrument, one year on accessories


Model Name Description
Fluke 190-202/S Fluke 190-202/S ScopeMeter® Test Tool

  • Color ScopeMeter® 200 MHz
  • 2 channels
  • DMM/Ext.input
  • C290 Hard-shell Carrying Case
  • SW90W FlukeView for ScopeMeter Test Tool
  • Windows® software


Accessory Kits (1)
Model Name Description
Fluke MA190 Fluke MA190 Accessory Kit for Medical and Video Applications
Batteries, Chargers & Adapters (4)
Model Name Description
Fluke BC190 Fluke BC190 Line Voltage Adapter / Battery Charger
Fluke BP290 Fluke BP290 2400 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
Fluke BP291 Fluke BP291 4800 mAh High Capacity Li-Ion Battery for Fluke 190-Series-II
Fluke EBC290 Fluke EBC290 External Battery Charger for BP290 and BP291
Cases & Holsters (2)
Model Name Description
Fluke C195 Fluke C195 Case
Fluke C290 Fluke C290 Hard Shell Protective Carrying Case for Fluke 190-series II
Clips (1)
Model Name Description
Fluke HC200 Fluke HC200 Hook Clip set 2 red, 2 gray
Current Clamps (1)
Model Name Description
Fluke i200s Fluke i200s AC Current Clamp
Options (2)
Model Name Description
Fluke SCC290 Fluke FlukeView Software for ScopeMeter (SW90W) and Carrying Case (C290) Kit
Fluke HH290 Fluke HH290 Hanging Hook for ScopeMeter 190-Series II
Software (1)
Model Name Description
Fluke SW90W Fluke SW90W FlukeView ScopeMeter Software
Test Leads, Probes & Clips (22)
Model Name Description
Fluke AS400 Fluke AS400 Probe Accessory Extension Set 1
Fluke RS400 Fluke RS400 Probe Accessory Replacement Set
Fluke RS500 Fluke RS500 Probe Set
Fluke TL175 Fluke TL175 TwistGuardTM Test Leads
Fluke VPS101 Fluke VPS101 – Voltage Probe Set, 1:1, one black
Fluke VPS410 Fluke VPS410 Probe-sets, 10:1 (1 red, 1 blue, 1 grey, 1 green)
Fluke VPS410-B Fluke VPS410-B ScopeMeter Voltage Probe-set, blue, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-G Fluke VPS410-G ScopeMeter Voltage Probe-set, grey, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-II-B Fluke VPS410-II-B ScopeMeter® Voltage Probe Set
Fluke VPS410-II-G Fluke VPS410-II-G ScopeMeter® Voltage Probe Set
Fluke VPS410-II-R Fluke VPS410-II-R ScopeMeter® Voltage Probe Set
Fluke VPS410-II-V Fluke VPS410-II-V ScopeMeter® Voltage Probe Set
Fluke VPS410-R Fluke VPS410-R ScopeMeter Voltage Probe-set, red, 10:1, 300 MHz, 1000V CAT III, 600V CAT IV
Fluke VPS410-V Fluke VPS410-V ScopeMeter® Voltage Probe Set
Fluke VPS410-X Fluke VPS410-X Voltage Probes
Fluke VPS420-B Fluke VPS420-B ScopeMeter® Voltage Probe Set
Fluke VPS420-G Fluke VPS420-G ScopeMeter® Voltage Probe Set
Fluke VPS420-R Fluke VPS420-R ScopeMeter® Voltage Probe Set
Fluke VPS420-V Fluke VPS420-V ScopeMeter® Voltage Probe Set
Fluke VPS510-B Fluke VPS510-B ScopeMeter® Compact Probe
Fluke VPS510-R Fluke VPS510-R ScopeMeter® Compact Probe
Fluke VPS510-V Fluke VPS510-V ScopeMeter® Compact Probe


190 Series II Users Manual Download
190 Series II Users Manual Supplement Download
190 Programmers Guide Download
190 Series II Service Manual Download
190 Series II Service Manual Supplement Download
190 Series II Statement of Memory Volatility Download
EBC290 Instruction Sheet Download
HH290 Instruction Sheet Download
Application Notes (14)
A first look at digital storage oscilloscopes Download
Capturing elusive waveform anomalies with pass/fail Download
Checking voltage-frequency ratio on variable-speed drives with a Fluke ScopeMeter 190 Series test tools Download
Easy capture of in-rush currents with a Fluke ScopeMeter 190 Series test tools Download
Fluke ScopeMeter 125 test tools helps solve a Modbus RS-485 timing problem Download
Injection molding machine measurements with a Fluke ScopeMeter 190 Series test tools Download
Measuring motor shaft voltage and bearing currents with the Fluke 190 Series II ScopeMeter test tools Download
Measuring short interrupts on the mains with a Fluke ScopeMeter 190 Series Test Tools Download
On the rivers of Suriname Download
Optimum oscilloscope bandwidth and sample rate Download
Troubleshooting made simple with Fluke 190C Series ScopeMeter test tools Download
Using a Fluke ScopeMeter 125 to troubleshoot FOUNDATION fieldbus installations Download
Verifying hydraulic control system operation Download
Who sets the rules for electrical testing and safety? Download
Brochures (3)
Fluke 190 and 120 Series ScopeMeter Test Tools Family Brochure Download
Fluke ScopeMeter Test Tools Family Brochure Download
Introducing the complete 190 Series II ScopeMeter® Test Tool Download
Data Sheets (2)
Fluke ScopeMeter 190 Series Test Tools Data Sheet Download
Fluke ScopeMeter Test Tools VSD Failure Download