Fluke 902 FC True-rms HVAC Clamp Meter

Use the Fluke 902 FC True-rms HVAC Clamp Meter to take essential HVAC measurements, create reports, and collaborate with peers from the work site.

ขอใบเสนอราคา

 

 

Overview

Fluke 902 FC True-rms HVAC Clamp Meter enables HVAC technicians to create reports and collaborate with peers from the work site.

The Fluke 902 FC True-rms HVAC Clamp Meter, a wireless Fluke Connect®-enabled meter, improves the productivity of HVAC technicians in the field. The rugged dual rated – CAT III, 600 /CAT IV, 300 V – meter performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature — eliminating the need to carry multiple tools. Its small body is easy to hold and the jaw fits perfectly in tight work spaces.

As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. Those measurements can be uploaded to the cloud. Technicians can combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues with ShareLive™ video calls or email, increasing productivity in the field.

The clamp meter also decreases the frequency that technicians will need to wear personal protective equipment when working on high voltage/current panels. Simply turn off the panel, verify the panel is de-energized using standard safety procedures, place the clamp and sync it to a smartphone with the Fluke Connect app, close the panel, reenergize it, and take measurements from a safe distance.

Features

Applications for HVAC

  • 200 µA DC current measurements to measure flame rod
  • Extended resistance range to measure thermistors up to 60kΩ
  • Capture flue gas temperature
  • Measure start and run motor capacitors
  • Measure performance of variable frequency drives

Fluke Connect

  • Fluke Connect connects your meter to your phone through Bluetooth to help you get more done faster and safer
  • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
  • Troubleshoot better by instantly trending and monitoring measurements live on your phone screen
  • Create and email reports right from the field. Report not enough? Fluke Connect has ShareLive video calls that stream live video and measurements in the same screen
  • Don’t stop to write down results, save them directly from your meter to your phone with the press of a button

Measurement capability

  • 600 A ac current measurement
  • 600 V ac and dc voltage measurement
  • Temperature measurement from -10 °C to 400 °C (14 °F to 752 °F)
  • 1000 µF capacitance measurement
  • DC Current measurement to 200 µA
  • True-rms voltage and current for accurate measurements on non-linear signals
  • Resistance measurement to 60 kΩ
  • Min and max recording to capture variations automatically

Other features

  • CAT III 600V, CAT IV 300V safety rating
  • TPAK magnetic strap (optional) allows you to conveniently hang the meter while using the probes
  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy-to-read backlit display
  • Three-year warranty
  • Soft carrying case

Specifications

Function
A ac (via Jaw) Resolution 0.01/0.1 A
Accuracy 2.0% ±5 digit (45-65 Hz)
2.5% ±5 digit (65-400 Hz)
Range 60.00/600.0 A
Crest Factor (50Hz or 60Hz) 2.5 MIN@220 A
3.0 MIN@180 A
> 1.4 MIN@600 A
Add 2% for CF>400 A
V ac Resolution 0.1 V
Accuracy 1.5% ±5 digits
Range 600.0 V
V dc Resolution 0.1 V
Accuracy 1.5% ±5 digits
Range 600.0 V
Ohms Resolution 0.1/1/10
Accuracy 1% ±5 digits
Range 600/6000/60.00 kΩ
Capacitance Resolution 0.1/1 µF
Accuracy 1% ±4 digits
Range 100.0/1000 µF
µA Resolution 0.1 µA
Accuracy 1% ±5 digits
Range 200 µA
Contact temperature Resolution 0.1 C/F
Accuracy 1% ±8 digits
Range -10 to 400 °C (14 °F to 752 °F)
Continuity beeper Beeper volume 75 dBA nom. 15 cm. from case front
On threshold <=30 Ω
Mechanical and General Specifications
Maximum voltage between any terminal and earth ground 1000 V
Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6
Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Operating humidity Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F))
Altitude Operating: 3,000 m (9,842 ft)
Storage: 12,000 m (39,370 ft)
Dimensions 230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in)
Weight (meter only) 419 g (15 oz)
Safety IEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V
IP Rating IEC 60529: IP30, non-operating
Radio Frequency Certification FCC ID : T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC) International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficients Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C

Models

Model Name Description
FLK-902 FC Fluke 902 FC True-rms HVAC Clamp Meter

Includes:

  • TL75 test leads (1 pair)
  • 80BK integrated DMM temperature probe (1)
  • AA alkaline batteries (2)
  • Soft carrying case
  • User’s manual
  • Statement of calibration

Accessories

Cases & Holsters
Model Name Description
Fluke C1600 Fluke C1600 Gear Box for Meters and Accessories
Fluke C33 Fluke C33 Soft Carrying Case
Fluke C550 Fluke C550 Tool Bag
Fluke C781 Fluke C781 Meter Case
Fluke H3 Fluke H3 Clamp Meter Holster
Fluke TPAK Fluke TPAK ToolPakTM Magnetic Meter Hanger
Clips
Model Name Description
Fluke AC220 Fluke AC220 SureGripTM Alligator Clips
Fluke AC285 Fluke AC285 SureGripTM Alligator Clips
Fluke AC87 Fluke AC87 Heavy Duty Bus Bar Clip Set
Fluke AC89 Fluke AC89 Heavy Duty Insulation Piercing Test Clip
Compatible Products
Model Name Description
Fluke LVD1 Fluke LVD1 Volt Light
Light
Model Name Description
Fluke L206 Fluke L206 Deluxe LED Hat Light
Fluke L210 Fluke L210 Probe Light Kit
Temperature Accessories
Model Name Description
Fluke 80AK A Fluke 80AK-A Thermocouple Adapter
Fluke 80PK 8 Fluke 80PK-8 Pipe Clamp Temperature Probe
Test Leads
Model Name Description
Fluke TL220 Fluke TL220 SureGripTM Industrial Test Lead Set
Fluke TL223 Fluke TL223 SureGripTM Electrical Test Lead Set
Fluke TL224 Fluke TL224 SureGripTM Insulated Test Leads
Fluke TL71 Fluke TL71 Premium Test Lead Set
Fluke TL75 Fluke TL75 Hard PointTM Test Lead Set
Test Probes

Manuals

Model Name Description
Fluke TP1 Fluke TP1 Slim Reach Test Probes

Knowledge and Information

Manuals 
Application Notes
Brochures
Data Sheets