Pressure range 0 to 3,000 psi (210 bar)
This pneumatic comparison pressure comparator is designed for testing pressure measuring instruments against master test instruments. This cost effective instrument provides precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers.
Note : Unit requires pressure source (i.e. nitrogen bottle) for operation.
A pressure comparator supplies the same precisely controlled pressure to both a reference gauge and device under test for calibration. The Fluke P5513 is ideal for pneumatic calibration workload over 300 psi.
Make it a Pressure Calibrator (P5513-2700G)
The Fluke Calibration P5513 Pressure Comparator when combined with the 2700G Reference Pressure Gauges becomes an easy-to-use alternative to traditional deadweight testers that covers a wide range of workload. For convenience, the P5513 is bundled together with selected 2700G Reference Pressure Gauges for a complete bench top pressure calibration solution. These pressure calibrators provide the accuracy, reliability, and capability you need to calibrate dial gauges, digital test gauges and pressure transmitters.
For example, the P5513-2700G-3 is a P5513 Pressure Comparator, bundled together with 2700G-G20M, 2700G-BG7M, 2700G-BG700K. This calibrator has three pressure ranges corresponding to the three 2700G Reference Pressure Gauges in the bundle and covers a total pressure range of –12 psi to 3000 psi (–80 kPa to 20 MPa).
The accuracy of the calibrator is equal to the accuracy of the 2700G Reference Pressure Gauge being used: ±0.02% full scale of positive pressure or ±0.05% of full scale for vacuum.
|Pressure Range||0 to 3,000 psi (210 bar)|
|Instrument Size (W x D x H)||17.5 x 12 x 8.5 in (440 x 300 x 215 mm)|
|Instrument Weight||17 lbs ( 8 kg)|
|Test Port Adapters||2 sets, 1/8, 1/4, 3/8 and 1/2 NPT or BSP|
|Gas Supply Connection||1/4 NPT female|
|5540 Metric and 5541 BSP Adapter Sets||P5540 Metric
M14 x 1.5, M20 x 1.5, 1/8 and 1/4 BSPP5541 BSP
1/8, 1/4, 3/8 and 1/2 BSPP5542 NPT
1/8, 1/4, 3/8 and 1/2 NPT
|P5543 Angle Adapter||To calibrate gauges with the pressure connection on the rear (for example, panel mount gauges) in their correct operating position, an angle adaptor should be used. The angle adapter uses the standard gauge adapters and positions the gauges at 90º. The maximum working pressure of this unit is 10,000 psi (700 bar).|
|P5544 Two Gauge Stand||This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar).|
|P5551 Pointer Remover / Punch||This tool is designed to quickly remove and consistently refit the pointer of a pressure gauge.|
P551X and 2700G Introduction and Demonstration Video